8024200D ошибка обновления windows 7 как исправить?

6 ответов на вопрос “8024200D ошибка обновления windows 7 как исправить?”

  1. MUD Ответить

    Hi Isa,
    You can try these steps from Windows support.
    Method 1: Run Windows update troubleshooter (if you have not run already)
    a.Open Search by swiping in from the right edge of the screen (or if you’re using a mouse, pointing to the upper-right corner of the screen and moving the mouse pointer down), and then tapping or clicking Search.
    b.Tap or click Settings and type troubleshooting in the text box.
    c.Tap or click Troubleshooting from the list of results.
    d.Tap or click Fix problems with Windows Update, click Next and follow the instructions.
    Method 2: Perform clean boot and check.

    You may perform a clean boot to check if any third party application is causing the issue.
    Step 1:
    a) Press the ‘Windows + R’ key on the keyboard.
    b) In the ‘Run’ windows type ’MSCONFIG’ and click ‘Ok’.
    c) Click the ‘Boot’ tab and uncheck ‘Safe Boot’ option.
    d) On the ‘General’ tab, click to select the option ‘Selective startup’, and then click to clear the option Load startup items check box.
    e) On the ‘Services’ tab, click to select the ‘Hide all Microsoft services’ check box, and then click ‘Disable all’.
    f) On the ‘StartUp’ tab, click ‘Open Task Manager’. In the Task Manager windowunder startup tab, right click on each startup item which are enabled and select ‘Disable’.
    g) Click ‘OK’, and then click Restart.
    Step 2: Enable half of the services
    a) Follow steps 1a and 1b to start the System Configuration utility.
    b) Click the Services tab, and then click to select the Hide all Microsoft servicescheck box.
    c) Click to select half of the check boxes in the Service list.
    d) Click OK, and then click Restart.
    Step 3: Determine whether the problem returns
    If the problem still occurs, repeat step 1 and step 2. In step 2, click to clear half of the check boxes that you originally selected in the Service list.
    If the problem does not occur, repeat step 1 and step 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
    If only one service is selected in the Service list, and you still experience the problem, the selected service causes the problem. Go to step 6. If no service causes this problem, go to step 4.
    Step 4: Enable half of the Startup items
    If no startup item causes this problem, a Microsoft service most likely causes the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the Hide all Microsoft services check box in either step.
    Step 5: Determine whether the problem returns
    If the problem still occurs, repeat step 1 and step 4. In step 4, click to clear half of the check boxes that you originally selected in the Startup Item list.
    If the problem does not occur, repeat step 1 and step 4. In step 4, select only half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
    If only one startup item is selected in the Startup Item list, and you still experience the problem, the startup item that is selected in the list is the service that is causing the problem. Go to step 6.
    If no startup item causes this problem, a Microsoft service most likely causes the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the Hide all Microsoft services check box in either step.

    Step 6: Resolve the problem
    After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then click to clear the check box for the problem item.
    Step 7:
    Note: After you have finished troubleshooting, follow these steps to boot to normal startup.
    a) Press the ‘Windows + R’ key on the keyboard.
    b) In the ‘Run’ windows type ’MSCONFIG’ and click ‘Ok’.
    c) On the ‘General’ tab, click the ‘Normal Startup’ option, and then click ‘OK’.
    d) When you are prompted to restart the computer, click ‘Restart’.
    Method 3: Run System Update Readiness Tool and check.
    System Update Readiness Tool fixes Windows Update errors in Windows 8, Windows 7, and Windows Vista, Windows Server 2008 R2, and Windows Server 2008
    http://support.microsoft.com/kb/947821
    For more information, visit the following link.Troubleshoot problems with installing updateshttp://windows.microsoft.com/en-US/windows-8/troubleshoot-problems-installing-updates
    What is the Browser Choice update? (KB976002)
    http://windows.microsoft.com/en-GB/windows/what-is-the-browser-choice-update
    If anything in my post is unclear or you have any further questions, please do not hesitate to let us know. It is our pleasure to be of assistance.
    Source: https://answers.mic…
    I hope this helps.
    Regards,
    Ryan

  2. VideoAnswer Ответить

Добавить ответ

Ваш e-mail не будет опубликован. Обязательные поля помечены *