По какой формуле рассчитывается давление в жидкости?

7 ответов на вопрос “По какой формуле рассчитывается давление в жидкости?”

  1. Crocus Ответить

    Hydrostatic pressure — pressure difference between two elevations.
    The simplified formula, which does not consider, for example, fluid’s compression, yet gives good estimations, can be obtained as follows:

    The formula depends only on the height of the fluid chamber, and not on its width or length. Given a large enough height, any pressure may be attained. It is believed that this was first demonstrated by Pascal in his barrel experiment.
    Pascal’s barrel is the name of a hydrostatics experiment allegedly performed by Blaise Pascal in 1646. In the experiment, Pascal inserted a 10-m long (32.8 ft) vertical tube into a barrel filled with water. When water was poured into the vertical tube, Pascal found that the increase in hydrostatic pressure caused the barrel to burst.
    This feature of hydrostatics has been called the hydrostatic paradox. As expressed by W. H. Besant,
    Any quantity of liquid, however small, may be made to support any weight, however large.

    Picture above shows that the static fluid pressure at a given depth does not depend upon the total mass, surface area, or the geometry of the container. It depends only on height of fluid. This is because the pressure to the inclined walls has vertical part, and in left vessel it points up, in middle vessel it points down, thus, adding or removing additional pressure to the bottom pressure, so it is proportional only to the height of fluid.
    Sources:
    Hydrostatics
    Vertical pressure variation
    Pascal’s law

  2. Детшот Ответить


    Здесь – давление, – плотность жидкости, – ускорение свободного падения ( м/с), – высота столба жидкости (глубина, на которой находится сдавливаемое тело).
    Единица измерения давления – Па (паскаль).

    Это векторная величина. В каждой точке жидкости давление одинаково во всех направлениях. Чаще всего в задачах требуется найти давление столба воды. Её плотность – 1000 кг/м. Формула верна не только для жидкости, но и для идеального газа. Есть ещё одна формула давления:

    Где – сила тяжести, действующая на жидкость (её вес), – площадь поверхности, на которую оказывается давление.

    Примеры решения задач по теме «Давление»

  3. VideoAnswer Ответить

  4. VideoAnswer Ответить

  5. VideoAnswer Ответить

Добавить ответ

Ваш e-mail не будет опубликован. Обязательные поля помечены *